ECS G41T-R3 User Manual

28
Using BIOS
Standard CMOS Setup
This option displays basic information about your system.
Help Item
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Use [ENTER], [TAB]
or [SHIFT
-TAB] to
select a field.
Use [+] or [-] to
configure system Date.
Standard CMOS Setup
Date & Time
The Date and Time items show the current date and time on the computer. If you are
running a Windows OS, these items are automatically updated whenever you make
changes to the Windows Date and Time Properties utility.
f
f
f
f
Date Thu 02/26/2010
Time 07 :02 :24
Primary IDE Master Not Detected
Primary IDE Slave
Not Detected
SATA1 Not Detected
SATA2 Not Detected
IDE BusMaster Enabled
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help
Primary IDE Master/Slave; SATA1~2
f
CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.
Primary IDE Master
Help Item
Select the type
of device connected
to the system.
Your computer has one IDE channel and each channel can be installed with one or two
devices (Master and Slave). In addition, this motherboard supports two SATA chan-
nels and each channel allows one SATA device to be installed. Use these items to
configure each device on the SATA channel.
Primary IDE Master
Device
Type Auto
LBA/Large Mode Auto
Block (Multi-Sextor Transfer) Auto
PIO Mode Auto
DMA Mode Auto
S.M.A.R.T. Auto
32Bit Data Transfer Enabled
: Not Detected
mnlk
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default Settings
F1: General Help

ECS G41T-R3 Specifications

General

Brand	ECS
Model	G41T-R3
Category	Motherboard
Language	English