EasyManuals Logo

ECS GF8200A User Manual

ECS GF8200A
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #44 background imageLoading...
Page #44 background image
38
Using BIOS
Soft-off by PWR-BTTN (Instant off)
Under ACPI (Advanced Configuration and Power management Interface) you can
create a software power down. In a software power down, the system can be resumed
by Wake Up Alarms. This item lets you install a software power down that is con-
trolled by the power button on your system. If the item is set to Instant-Off, then the
power button causes a software power down. If the item is set to Delay 4 Sec, then
you have to hold the power button down for four seconds to cause a software power
down.
PWRON After PWR-Fail (Power Off)
This item enables your computer to power off, automatically restart or return to its
previous status after abnormal power lost.
Resume By RING (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the Modem. You
must use an ATX power supply in order to use this feature.
Resume By PCI/PCI-E/Lan PME (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume if there is an incoming call on the PCI Modem or
PCI LAN card. You must use an ATX power supply in order to use this feature. Use
this item to do wake-up action if inserting the PCI card.
Resume By PS2 KB (S3) (Disabled)
This item enables or disables you to allow keyboard activity to awaken the system
from S3 mode.
Resume By PS2 MS (S3) (Disabled)
This item enables or disables you to allow mouse activity to awaken the system from
S3 mode.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
Resume By USB (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3
mode.
Press <Esc> to return to the main menu setting page.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the ECS GF8200A and is the answer not in the manual?

ECS GF8200A Specifications

General IconGeneral
Number of memory slots4
Maximum internal memory32 GB
Processor socketSocket AM2
Processor manufacturerAMD
Compatible processor seriesAMD Sempron
USB 2.0 connectors3
Power fan connectorYes
Number of COM connectors1
Number of SATA connectors5
USB 2.0 ports quantity6
Firewire (IEEE 1394) ports0
Audio chipIDT 92HD206
Audio output channels7.1 channels
Motherboard form factorATX
BIOS typeAMI
BIOS memory size64 Mbit
PCI Express x1 slots2
Maximum graphics card memory512 MB
RAID levels0, 1

Related product manuals