Using BIOS
35
CPU Configuration
The item in the menu shows the CPU.
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
This is display-only field and diaplays the information of the CPU installed in
yourcomputer.
EMT64 (Supported)
This item shows the computer supports EMT64.
Microcode Revision (28)
This item shows the Microcode version.
Processor Stepping (206a6)
This item shows the processor stepping version.
Intel HT Technology (Not Supported)
This item shows that your computer does not support Intel HT technology.
Processor Cores (4)
This item shows the core number of the processor.
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit. When supports
Prescott and LGA775 CPUs, enables this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.
Main Advanced Chipset M.I.B III Boot Security Exit
Number of cores to enable
in each processor package.
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Processor Speed (3300 MHz)
This item shows the current processor speed.
CPU Configuration
Intel(R) Core(TM) i5-2500K CPU @ 3.30GHz
EMT64 Supported
Processor Speed 3300 MHz
Processor Stepping 206a6
Microcode Revision 28
Processor Cores 4
Intel HT Technology Not Supported
Intel VT-x Technology Supported
Active Processor Cores All
Limit CPUID Maximum
Disabled
Execute Disable Bit Enabled
Intel Virtualization Technology Enabled
CPU C3 Report Enabled
CPU C3 Report Enabled
Enhanced Halt (C1E) Enabled
Intel VT-x Technology (Supported)
This item shows that your computer supports Intel VT-x technology.
Active Processor Cores (All)
Use this item to control the active processor cores.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
