51
H61H2-M16 USER MANUAL
Chapter 3
Press <Esc> to return to the M.I.B III Menu page.
Chipset OverClocking Configuration
Scroll to this item to view the following screen:
Main Advanced Chipset M.I.B III Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
ESC/Right Click: Exit
The selection of Performance
Memory Profiles which impacts
memory sizing behavior.
F4: Save & Exit
Long Duration Maintained (10)
Use this item to control the time window over PL1 value should be maintained. This
is for Turbo mode.
Short Duration Power Limit Override (Maximum)
Intel(R) Turbo Boost Technology will use this power limit for a very short duration.
After that, the long duration power limit will be honored.
Graphics Voltage(1/256) (0)
This item allows you to adjust the internal GFX voltage.
Graphics Core Ratio Limit (23)
This item allows you to control the internal GFX Turbo ratio.
Memory Multiplier Configuration
Performance Memory Profiles Automatic
XMP Profile 1 Supported
XMP Profile 2 Not Supported
Memory Timing Configuration
CAS# Latency(tCL) 9
RAS# to CAS# Delay(tRCD) 9
Row Precharge Time(tRP) 9
RAS# Active Time(tRAS) 24
Write Recovery Time(tWR) 10
Row Refresh Cycle Time(tRFC) 74
Active to Active Delay(tRRD) 4
Write to Read Delay(tWTR) 5
Read CAS# Precharge(tRTP) 5
Four Active Window Delay(tFAW) 20
CAS Latency (tCL) (9)
This item determines the operation of DDR SDRAM memory CAS (colulmn address
strobe). It is recommended that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
XMP Profile 1/2 (Supported/Not Supported)
These items show the information of Performance Memory Profile.
Performance Memory Profiles (Automatic)
This item enables you to set the Performance Memory Profile.
To Next Page
Loading...
Need help?
General
