ECS H61H2-M16 - Page 44

H61H2-M16 USER MANUAL
40
Chapter 3
Serial Port 1 Configuration
Scroll to this item and press <Enter> to view the following screen:
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=2F8h; IRQ=3)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
Serial Port 1 Configuration
Serial Port [Enabled]
Device Settings IO=2F8h; IRQ=3;
Enable or Disable Serial
Port1 (COM)
Change Settings [Auto]
Press <Esc> to return to the Super IO Configuration page.
F2:Previous Values
F1:General Help
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Version 2.15.1229. Copyright (C) 2012, American Megatrends, Inc.
Main
Advanced Chipset M.I.B III Boot Security Exit