ECS H67H2-M2

43
Using BIOS
Parallel Port Configuration
Scroll to this item and press <Enter> and view the following screen.
Serial Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- : Change Opt.
Enter : Select


:Select Screen
:Select Item
Parallel Port Configuration
Serial Port [Enabled]
Device Settings IO=378h; IRQ=5;
Change Settings [Auto]
Device Mode [Standard Parallel ¡-]
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Values
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enable or Disable Parallel
Port (LPT/LPTE)
Main Advanced Chipset M.I.B III Boot Security Save & Exit
Device Mode (Standard Parallel ¡-)
This item allows you to select the device mode for a better operation environment.
Press <Esc> to return to the Super IO Configuration page.