ECS H67H2-M4 - Page 46

42
Using BIOS
Parallel Port Configuration
This item shows the information of the super IO chip.
Parallel Port (Enabled)
This item allows you to enable or disable serial port.
Device Settings (IO=378h; IRQ=5)
This item shows the information of the device settings.
Change Settings (Auto)
Use this item to change device settings.
+/- : Value
Enter : Select


:Select Screen
:Select Item
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=5;
F1:General Help
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
F2:Previous Value
F3:Optimized Defaults
F4:Save & Exit
ESC:Exit
Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.
Enable or Disable Parallel
Port (LPT/LPTE)
Change Settings [Auto]
Device Mode [Standard Parallel ...]
Main Advanced Chipset M.I.B III Boot Security Save & Exit