Chapter 3
H81H3-M USER MANUAL
39
Limit CPUID Maximum (Disabled)
Use this item to enable or disable the maximum CPUID value limit, you can enable
this item to prevent the system from “rebooting” when trying to install Windows NT
4.0.
Execute Disabled Bit (Enabled)
This item allows the processor to classify areas in memory by where application
code can excute and where it cannot. When a malicious worm attempts to insert
code in the buffer, the processor disables code excution, preventing damage or worm
propagation. Replacing older computers with Excute Disable Bit enabled systems
can halt worm attacks, reducing the need for virus related repair.
Intel Virtualization Technology (Enabled)
When disabled, a VMM cannot utilize the additional hardware capabilities provided
by Vandor Pool Technology.
LakeTiny Feature (Enabled)
Use this item to enable or disable the LakeTiny for C state configuration.
CPU C3 Report (Enabled)
Use this item to enable or disable CPU C3 (ACPI C2) report to OS.
CPU C6 Report (Enabled)
Use this item to enable or disable CPU C6 (ACPI C3) report to OS.
CPU C7 Report (C7s)
Use this item to enable or disable CPU C7 report to OS.
Package C State limit (AUTO)
Use this item to set package C state limit.
Enhanced Halt (C1E)
Use this item to enable or disable the Enhanced C1 state.
Press <Esc> to return to the Advanced Menu page.
To Next Page
Loading...
Need help?
General
