ECS IC55H-A - Load Default Settings; Supervisor Password; User Password

44
Using BIOS
Load Default Settings
This option opens a dialog box that lets you install stability-oriented defaults for
all appropriate items in the Setup Utility. Select <OK> and then press <Enter> to
install the defaults. Select <Cancel> and then press <Enter> to not install the
defaults.
Load Non Disk
1. The default value of the item “Onboard LAN Boot ROM” is “ Disabled”
accordingly since the item “Load Non Disk” is set to “Disabled”.
2. You may highlight this option and press <Enter> to Enable it.
CMOS Setup Utility -- Copyright (C) 1985-2010, American Megatrends, Inc.




v02.69 (C)Copyright 1985-2010, American Mega trends, Inc.




Standard CMOS Setup
Advanced Setup
Advanced Chipset Setup
Integrated Peripherals
Power Management Setup
PCI/PnP Setup
PC Health Status


M.I.B. III (MB Intelligent BIOS III)
Load Default Settings
Load Non Disk
Supervisor Password
User Password
Save & Exit Setup
Exit Without Saving
3. Reboot.
: Move F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help

CMOS Setup Utility - Copyright (C) 1985-2010, American Megatrends, Inc.
Integrated Peripherals
Help Item
Options
Disabled
Enabled
: Move F10: Save ESC: Exit
+/-/: Value
Enter : Select
F9: Optimized Defaults
F1:General Help

SATA Configuration IDE
Onboard SATA Mode Enhanced
Onboard AUDIO Function Enabled
Onboard LAN Function Enabled
Onboard LAN Boot ROM Disabled
Serial Port1 Address 3F8/IRQ4
USB Functions Enabled
Legacy USB Support Enabled