20
Using BIOS
SATA Configuration
This item in the menu shows the mode of serial ATA configuration options.
SATA Mode (AHCI)
Use this item to select SA
TA mode (Disabled, AHCI Mode or RAID Mode).
SATA Port 1/M.2 (KINGSTON SV300 (120.0GB)/Not Present)
This motherboard supports one SATA channels and one M.2 channel, each channel
allows one SATA/M.2 device to be installed. Use these items to configure each device
on the SATA/M.2 channel.
Spin Up Device (Disabled)
Use this item to enable or disable the spin up device.
External SATA (Disabled)
Use this item to enable or disable the external SATA.
Press <Esc> to return to the Advanced Menu page.
Main Advanced Chipset Tweak Security Boot Exit
Determines how SATA
controller(s) operate.
SATA Configuration
SATA Mode AHCI
SATAII Port1
KINGSTON SV300 (120.0GB)
Spin Up Device Disabled
External SATA Disabled
M.2
Not Present
+/- : Change Opt.
Enter/Dbl Click : Select
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
To Next Page
Loading...
