39
Using BIOS
Resume by Alarm (Disabled)
When set to Enabled, additional fields become adjustable and you can set the date (day of the
month), hour, minute and second to turn on your system. When set to 0 (zero) for the day
of the month, the alarm will power on your system every day at the specified time.
Press <Esc> to return to the Main BIOS Settings page.
BIOS Security Features
This option displays the BIOS security Features function.
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
BIOS Security Features
Help Item
: Move
F10: Save
F1: General help
+/-/: Value
Enter : Select
ESC: Exit
F9: Optimized Defaults
F8: Fail-Safe DefaultsF7:Previous Values
Supervisor Password : Not Installed
User Password : Not Installed
Set Supervisor Password [Press Enter]
Set User Password [Press Enter]
Virus Warning [Disabled]
Security Settings
Install or Change the
password
Supervisor Password/User Password (Not Installed)
This item indicates whether a supervisor password/user password has been set. If the pass-
word has benn installed, Installed displays. If not, Not Installed displays.
Set Supervisor Password/User Password (Press Enter)
You can select this option and press <Enter> to access the sub menu. You can use the sub
menu to change the supervisor password.
Virus Warning (Disabled)
If set to Disabled, when anything attempts to access the boot sector or hard disk partition
table, there will be no warning message to appear.
Press <Esc> to return to the Main BIOS Settings page.
To Next Page
Loading...
Need help?
General
