ECS RC410-M2

40
Using BIOS
Load Default Settings
This option opens a dialog box that lets you install optimized defaults for all appropriate
items in the Setup Utility. Press <OK> and then <Enter> to install the defaults. Press
<Canel> and then <Enter> to not install the defaults. If you only want to install setup
defaults for a specific option, select and display that option, and then press <F9>.
Load Failsafe Defaults
This option opens a dialog box that lets you install fail-safe defaults for all appropriate
items in the Setup Utility: Press <OK> and the <Enter> to install the defaults. Press
<Canel> and then <Enter> to not install the defaults. The fail-safe defaults place no great
demands on the system and are generally stable. If your system is not functioning
correctly, try installing the fail-safe defaults as a first step in getting your system working
properly again. If you only want to install fail-safe defaults for a specific option, select
and display that option, and then press <F8>.
Discard Changes and Exit
Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box appears,
press <OK> to discard changes and exit, or press <Cancel> to return to the main menu.
Save and Exit Setup
Highlight this item and press <Enter> to save the changes that you have made in the Setup
Utility and exit the Setup Utility. When the Save and Exit dialog box appears, press <OK>
to save and exit, or press <Cancel> to return to the main menu:
Exit Without Saving
Highlight this item and press <Enter> to discard any changes that you have made in the
Setup Utility and exit the Setup Utility. When the Exit Without Saving dialog box appears,
press <OK> to discard changes and exit, or press <Cancel> to return to the main menu.
If you have made settings that you do not want to save, use the “Discard
Changes and Exit” item and press <OK> to discard any changes you have
made.