[
ECTIVE
®
SINUS/SINE INVERTER – CSI-/SSI-SERIES
]
34
What is an inverter?
An inverter is a technical device to invert d.c. voltage into sinusoidal alternating voltage.
In the case of the ECTIVE
®
inverter the d.c. voltage is usually provided by a battery. In
this way, the inverter inverts direct into alternating current. The 230 V grounded protect-
ed contact socket of the inverter allows to operate electronic devices independant of
position and autonomously, which usually need a 230 V a domestic power supply.
With the integrated IUoU charger of the ECTIVE
®
inverter CSI-series, you have the
possibility to recharge the used batteries.
Devices of the SSI-serie have an MPPT solar charge controller in addition to the original
charger.
ECO-Mode: With the ECO-Mode from CSI150/SSI100-series you have the additional
function of a battery priority circuit. When the ECO-Mode („INV Mode“ for SSI-series)
is switched on and AC- Power is available, the battery does not use the AC power and
the batteries will not be charged. (ECO-Mode = Energy-Saving-Mode)
The battery priority function is active as long as the battery voltage is over the certain
“cut off”-battery voltage (voltage values see the chart “safety features” on page 58).
If this value is deceeded and the shore power is still connected, the inverter returns to
mains priority circuit to avoid battery damages.
CSI-Serie SSI-Serie
To Next Page
Loading...
Need help?
General
