[
ECTIVE
®
SINUS/SINE INVERTER – CSI-/SSI-SERIES
]
48
Operating performance MPPT-charge controller
(SSI100 to 300-series)
Battery voltage 12 V 24 V 48 V
Charge efficiency > 97 %
Solar input voltage 15 – 70 V 24 – 70 V 48 – 70 V
Max. input current 20 A 10 A 5 A
Max. input power 550 W
Recommended surrounding conditions
Operating temperature -15 °C bis 40 °C
Storage temperature -40 °C bis 85 °C
Relative humidity 20 % ~ 90 %
☝ Please note!
Please mind the starting current!
Keep in mind that inductive devices (for example power drills or refrigerators etc.) often
need a 3–10 times higher power at the beginning than indicated on the descriptive
type plate. The maximum power of this short period should not surpass the maximum
power of the inverter.
☝ Please note!
Listen to the acoustic signal!
In case of overload an acoustic signal will sound. If the needed power is not reduced to
the maximal continuous output, the inverter will shut down automatically.
☝ Please note!
Output losses because of heat
An ambient temperature over 40°C (for ex. due to heat at the installation site or direct
sunlight) can lower the specified output and efficiency.
To Next Page
Loading...
Need help?
General
