F Series Fetal & Maternal Monitor User Manual Maternal Monitoring Display
- 112 -
SpO
2
SENSOR
OFF
SpO
2
SpO
2
sensor is not well
connected.
Check the connection of
SpO
2
sensor and finger
placement.
SpO
2
EQUIP
MALF
SpO
2
The SpO
2
board can not
communicate with the system
successfully.
Restart the monitor and try
again, contact the
manufacturer if the
connection still fails.
TEMP
UNPLUGGED
TEMP
TEMP sensor is not well
connected.
Check the connection of
TEMP sensor.
TEMP Calibration
Failed
TEMP
Calibration of the TEMP sensor
failed.
Restart the monitor and try
again. Contact the
manufacturer for service if
the problem persists.
To Next Page
Loading...
