Need help?Do you have a question about the EDAN VE-H100B and is the answer not in the manual?
General| Category | Medical Equipment |
|---|---|
| Model | VE-H100B |
| Species | Human |
| Power Supply | AC 100-240V, 50/60Hz |
| Parameters | WBC, RBC, HGB, HCT, MCV, MCH, MCHC, PLT |
| Throughput | 60 samples per hour |
| Interface | USB |
Describes the manual's purpose, scope, and EDAN's liability.
Outlines manufacturer's responsibility based on specific conditions.
Defines WARNING, CAUTION, and NOTE labels for user guidance.
Provides critical safety advice to prevent injury, death, or equipment damage.
Alerts users to exercise care for safe and effective device operation.
Offers supplementary information that may be easily overlooked.
Explains the various symbols displayed on the oximeter.
Specifies the device's intended purpose and patient populations.
Identifies and describes controls, displays, and buttons on the device.
Details the procedure for connecting sensors and cables to the device.
Explains battery types, installation, and operation.
Lists standard and optional accessories included with the device.
Explains the step-by-step procedure to power on the pulse oximeter.
Describes the operational states and modes of the oximeter.
Guides users through navigating and configuring the device's system settings.
Configures the high and low alarm limits for SpO2 readings.
Configures the high and low alarm limits for Pulse Rate (PR).
Details the procedure for charging the rechargeable battery.
Introduces the software used for managing oximeter data.
Provides guidance on applying and using the VE-SH7 veterinary pulse oximetry sensor.
Classifies alarms by type and severity.
Details specific conditions that trigger various alarms on the device.
Explains how to verify the proper functioning of the device's alarm system.
Discusses patient conditions and factors affecting measurement accuracy.
Details factors that can lead to inaccurate measurements from the sensor.
Describes how to test the SpO2 measurement functionality using a simulator.
Explains methods to evaluate the quality and validity of SpO2 readings.
Provides guidelines for periodic safety checks, cleaning, and disinfection procedures.
Describes the underlying principles of how pulse oximetry measures SpO2 and PR.
Differentiates between functional and fractional oxygen saturation measurements.
Details the terms, conditions, and limitations of the product warranty.
Provides contact details for technical support and service inquiries.
Details the device's classification and safety standards.
Defines operating and storage environmental conditions.
Details specifications for alkaline and Ni-MH rechargeable batteries.
Lists measurement ranges, accuracy tolerances, and resolution.
Details compliance with electromagnetic emission standards.
Details compliance with electromagnetic immunity standards.
Provides guidance on safe distances from RF communication equipment.
Provides a template for recording patient data.
Lists and defines common abbreviations used in the manual.
To Next Page
