EDAN VE-H100B - Oximeter Operation; Turning on the Oximeter

VE-H100B Veterinary Pulse Oximeter User Manual
- 33 -
3 Oximeter Operation
3.1 Turning on the Oximeter
The oximeter is turned on by pressing the on/off button, and it will
cycle through a POST before displaying valid data values. Verify
that all the circuitry and functions of the oximeter work properly
during the POST. It needs a few seconds to complete the
verification procedure POST. If it functions incorrectly, do not use
the oximeter.
Press the On/Off button for one second to turn on the oximeter.
 At first the EDAN LOGO is shown.
Figure 3-1 EDAN LOGO
 Secondly the product model is displayed.
Figure 3-2 Model
理邦保密文件
EDAN CONFIDENTIAL