EasyManua.ls Logo

EDAN VE-H100B - Alarm for Spo Sensor off; Alarm for Low Battery; Higher than Hi Alarm Limit

EDAN VE-H100B
110 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VE-H100B Veterinary Pulse Oximeter User Manual
- 60 -
5.2.3 Alarm for SpO
2
Sensor off
When the SpO
2
sensor falls off from the finger, the oximeter will
give a medium alarm, and the icon displays in
information area.
SpO
2
and PR value area display “---”, and give a medium alarm.
(Make sure the alarm system in menu is ON.)
5.2.4 Alarm for Low Battery
When the battery is too low, the oximeter gives a medium alarm
for low battery.
After the low battery alarm occurs, the oximeter can still be
operated for a few minutes before it turns off automatically.
The low battery icon displays on LCD, and gives a
medium alarm. (Make sure Alarm System in menu is ON.)
5.2.5 Higher than Hi Alarm Limit
If the measured SpO
2
or PR value is higher than the Hi Alarm
(upper alarm limit), the oximeter gives a high alarm.
Here we take PR for example:
If the measured PR value is higher than the setup PR Hi Alarm,
the oximeter gives a high alarm (Make sure Alarm System in
menu is ON). A ↑ icon displays near PR, which indicates that the
measured value is higher than that of PR Hi Alarm, it will
理邦保密文件
EDAN CONFIDENTIAL

Table of Contents