EDAN VE-H100B - Sensitivity

VE-H100B Veterinary Pulse Oximeter User Manual
- 43 -
Figure 3-13 Factory Default Config
Factory Default Configuration is shown as follows:
System Mode:
Model: VET
Alarm System: ON
Alarm Volume: 3
Pulse Volume: 3
Audio Paused (s): 60
SpO
2
Hi Alarm: 100
SpO
2
Lo Alarm: 85
PR Hi Alarm: 170
PR Lo Alarm: 40
Patient ID No.: 1
Data Storage: OFF
3.3.8 Sensitivity
The SpO
2
reading is the average of data collected within a specific
time. You can set the Sensitivity to Hi or Low via the menu. The
理邦保密文件
EDAN CONFIDENTIAL