EDAN VE-H100B - System Mode; Model; Alarm Volume; Pulse Volume

VE-H100B Veterinary Pulse Oximeter User Manual
- 40 -
Alarm, after restarting the oximeter, the value will
resume to the default value for corresponding patient
type.
3.3.1 System Mode
There are two items for selecting:
Waveform mode
Large numeric mode
Then confirm the selection by pressing the Function button.
3.3.2 Model
It indicates that the oximeter can be used by veterinary only and
this item is unselectable and unmodifiable.
3.3.3 Alarm Volume
The Alarm Volume button is used to adjust alarm volume and its
range is from one to five.
When Alarm System is setup to ON, if a low alarm, a medium
alarm or a high alarm occurs, the oximeter sounds beep.
3.3.4 Pulse Volume
The user can turn on or off the pulse volume by pressing Pulse
理邦保密文件
EDAN CONFIDENTIAL