Patient Monitor User Manual Basic Operation
- 20 -
secures the power cable.
7 Power supply interface: for connecting AC power cable.
8
Network interface. It connects the monitor to the central monitoring system (also
named as MFM-CMS), CMS-LITE or gateway via standard network cable, which
enables MFM-CMS or gateway to achieve bidirectional communication with the
monitor.
9
Multifunctional port: Nurse call port/analog output/defibrillator synchronization.
Nurse call port: it connects the monitor to the hospital’s nurse call system. Alarms
indications are alerted through the nurse call system if configured to do so.
Analog output: the monitor outputs the waveform through the port.
Defibrillator synchronization: the monitor outputs the defibrillator
synchronization signal through the port.
10
USB interfaces: supports USB 2.0 output. It connects approved USB devices, for
example, USB flash disk, barcode scanner, mouse and keyboard.
11 VGA output: it enables the VGA video output.
iM60/iM70
1
Handle: for lifting or moving the monitor, which is convenient, comfortable and
fast.
2 Label
3 VGA output: it enables the VGA video output.
3
4
5
6
12
11
10
7 8 9
1
2
To Next Page
Loading...
