Need help?Do you have a question about the Eden World Tour WT800C and is the answer not in the manual?
General| Channels | 2 |
|---|---|
| Dimensions | 4.5"H x 23"W x 12"D |
| Weight | 34 LBS |
| Outputs | 2 x Speakon, 1 x Balanced DI with Ground Lift |
| Impedance | 4Ω minimum |
| Power Output | 800W |
| Inputs | 1 x Instrument, 1 x Aux |
| EQ | 3-band EQ |
Warning regarding potential permanent hearing loss from high volume levels.
Details on Input Jack, Pad, Gain, Mute, and Set Level Indicator.
Description of Enhance control and DI Pre-/Post-EQ Select.
Explanation of the Bass shelving tone control.
Description of frequency and level controls for semi-parametric EQ.
Covers Treble tone control, EQ Clip Light, and Compressor controls.
Explanation of Bi-Amp, Bridge Mono, Balance, and Crossover controls.
Specifications for RMS output in stereo and bridge modes.
Description of Headphone Jack, Output Limit Indicators, DC Indicator, and Mains On/Off Switch.
Details on Left/High Amp and Bridge Mono speaker connectors.
Information on power connection, fuse type, and voltage selection.
Details on the balanced XLR output and its level control.
Covers Ground Lift switch and Mono/Stereo Effects Send/Return.
Function of the Tuner Out jack for connection to tuners.
Description of Aux. Input and the amplifier's cooling system.
Guidance on placement, ventilation, and heat-related safety.
Requirements for AC power and general connection safety.
Instructions for connecting speakers and setting switches for stereo mode.
How to engage and use Bridge Mono mode safely and effectively.
Instructions for setting up and using Bi-Amp mode with crossover control.
Key precautions and steps before powering on the unit.
How to engage and adjust the built-in compressor for desired effect.
Guidance on using EQ controls, including Enhance and tone sections.
Tips for setting the Enhance control for tone shaping.
Advice on using EQ to avoid clipping and maximize headroom.
Guidance on adjusting Bass and Treble controls for desired sound.
Instructions for adjusting semi-parametric controls to focus on frequencies.
Tips for achieving specific tones like fretless or rock sounds.
Explanation of clipping, its causes, and how to avoid it.
Discussion on frequency masking and how room acoustics affect sound.
Advice on selecting speaker cabinets for optimal performance.
Using the headphone jack to drive external power amplifiers.
Safe operation with headphones only for practice or as a preamp.
Procedure for cleaning input/output jacks to ensure good contact.
Instructions for cleaning ventilation openings to prevent overheating.
Critical warning about smoke indicating serious amplifier malfunction.
Information on website resources, FAQs, and contacting dealers for support.
Steps for obtaining service and Return Merchandise Authorization.
Example EQ settings for the amplifier.
Example EQ settings for the amplifier.
Example EQ settings for the amplifier.
Example EQ settings for the amplifier.
To Next Page
