Introduction to D-series Cabinets
The D series from Eden is a professional cabinet range within the range of products there are 3 different types of
cabinet each one has its own characteristics tonally.
• XLT - The XLT cabinet stands for eXtra Low with Tweeter, the overall tuning for this cabined is focused
producing powerful low end, while the crossover control and tweeter still allow you to dial in denition.
• XST - The XST cabinets stands for eXtra Smooth with Tweeter, the sound of the speakers used in XST
cabinets is smoother and more rounded than the XLT with the same crossover control and tweeter
allowing you to dial in denition.
• XT - The XT cabinet (810 model) is a combination of both XST and XLT principles combining speaker types for
a balanced all in one rig. Speaker Sizes- All Eden speakers have been designed to provide optimum
power, response time and musical tone reproduction.
There are many opinions on speaker size and the achievable sound from them. Much of this information is
subjective and the best way to determine the speaker size that suits you is to try it with your own amplier and
instrument.
Just remember the more speakers you have the louder you will be. Eden Crossover- D series cabinets have a
crossover and protection circuit. This circuit utilizes a fuse bulb to protect the tweeter from damage during use. If
your tweeter stops working it is advisable to take you cabinet to your nearest Eden dealer or support team to get
this element checked.
To Next Page
Loading...
