To Next Page
K
Kim CruzJul 29, 2025
What to do if I cannot connect to my Edge-Core ECS4310-26T using a web browser or SNMP software?
- LLisa MorseJul 29, 2025
If you're having trouble connecting to your Edge-Core Switch via a web browser or SNMP software, consider the following: * Ensure the switch is powered on. * Verify the network cabling between your management station and the switch. * Confirm you have a valid network connection to the switch and that the port you're using hasn't been disabled. * Make sure the VLAN interface, connecting the management station, is configured with a valid IP address, subnet mask, and default gateway. * Confirm that the management station's IP address is in the same subnet as the switch's IP interface to which it's connected.
General
