xvi
Figures
Figure 1-1 Front and Rear Panels 1-1
Figure 1-2 Port Status LEDs 1-4
Figure 1-3 System Status LED 1-5
Figure 1-4 Power Supply Sockets 1-5
Figure 2-1 PoE Connections 2-2
Figure 2-2 Collapsed Backbone 2-3
Figure 2-3 Network Aggregation Plan 2-4
Figure 2-4 Remote Connections with Fiber Cable 2-5
Figure 2-5 Making VLAN Connections 2-6
Figure 3-1 RJ-45 Connections 3-2
Figure 3-2 Attaching Brackets for Rack Mounting 3-3
Figure 3-3 Installing the Switch in a Rack 3-4
Figure 3-4 Attaching the Adhesive Feet 3-4
Figure 3-5 Inserting an SFP Transceiver into a Slot 3-5
Figure 3-6 Power Receptacle 3-6
Figure 3-7 Serial Port (DB-9 DTE) Pin-Out 3-7
Figure 4-1 Making Twisted-Pair Connections 4-2
Figure 4-2 Network Wiring Connections 4-3
Figure 4-3 Making Connections to SFP Transceivers 4-4
Figure B-1 RJ-45 Connector Pin Numbers B-1
Figure B-2 Straight-through Wiring B-2
Figure B-3 Crossover Wiring B-3
To Next Page
Loading...
Need help?
General
