VP3302 IP Phone User Manual
Most of the broadband network environments provided now by ISPs are
ADSL connections Under this environment, the IP Phone can directly connect to
Configure ► Password：135 ► Network ► (Yes/No) PPPoE
the ADSL modem by entering the PPPoE account information (user name and
password) provided by the ADSL service provider. Please follow the directions
below.
PPPoE m .
PPPoE Password – Please input the pa
I
Configu
Press the “OK” key to set Yes on “(Yes/No) PPPoE” when using the
ethod. And then key in the account information from the ISP vendor
PPPoE Username – Please input the user name of the account given by the
ADSL ISP.
ssword of the account given by ADSL
SP.
3.1.3 Static IP Method
For other network environments, users will need to set the static IP provided
by the ISP or from a MIS person in the office.
re ► Password：135 ► Network ► Static IP
.
her your internet connection is working
properly. Go to View Æ Ping, then key in a public IP address (e.g. 168.95.1.1)
to
Under the “Static IP” submenu, please key in the IP address, network mask
and default router settings provided by your ISP or private IP address.
Once all the network settings are completed, please restart your IP phone
You are now able to check whet
ping. If the response is ok, then the network settings are completed.
www.edge-core.com
19
To Next Page
Loading...
General