VP3302 IP Phone User Manual
3.5 “Forward” Configurations
T nt kinds of call forward
functions, please select “Configure” Æ “Forward mode” for these three kinds of
selectio
” submenu, users are able to setup for immediate
by selecting Yes on the “(Yes/No) Immediate” and input the number he/she
would like the call to be forwarded to. For example, when A calls B, and B’s phone
has Yes set for “(Yes/No) Immediate” with number 555-5555, then, under any
circumstance, a phone call from A will be forwarded to number 555-5555.
When the “immediate forward” is enabled, “busy forward” and “no answer
forward” can not be enabled. Only one can be enabled at a time.
3.5.2 Busy Forward
Under the “Forward mode” submenu, users are able to setup for busy forward
by selecting Yes for “(Yes/No) Busy” and input the number he/she would like calls
to be forwarded to when this phone is busy (active). For example: B has set Yes on
“(Yes/No) Busy” with number 555-5555. When A calls B, and B’s phone is busy,
the call from A will be forwarded to number 555-5555.
3.5.3 No Answer Forward
Under the “Forward mode” submenu, users are able to setup for no-answer
forward by selecting Yes on “(Yes/No) No Answer” and input the number he/she
would like the call to be forwarded to when the phone is not answered for the
specified amount of seconds. For example: B’s Phone has Yes set for “(Yes/No) No
Answer” with number 555-5555 and no-answer time equals 10. When A calls B,
and B’s phone is not answered, then, the call from A will be forwarded to number
555-5555 after ringing for 10 seconds with no answer.
he VP3302 series IP Phone supports three differe
ns:
3.5.1 Immediate Forward
Under “Forward mode
forward
www.edge-core.com
27
To Next Page
Loading...