INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
OPERATING INSTRUCTIONS
26
USER GUIDE
Select the power level that best suits your needs by highlighting it
and pressing enter (or simply touching it if you’re using a CTS).
Note: Please visit www.edgeproducts.com to see the detailed
list of CS/CTS dyno proven power/performance gains by vehicle
make/model/year.
PROGRAMMING
Choose your power level in the Programming menu:
The CS/CTS device comes ready with power levels to be programmed into
your vehicle’s Power Control Module (PCM) (see the Power Levels section of
the manual for further detailed Power Level descriptions). You can choose
these levels by entering the Programming menu, and choosing from one of
the listed Power Levels. The available levels will depend on the make and
model of your vehicle as well as the product type.
To Next Page
Loading...
Need help?
General