OPERATING INSTRUCTIONS
INTRODUCTION PARTS DESCRIPTION INSTALLATION OPERATING INSTRUCTIONS INTERNET UPDATES APPENDIX
29
USER GUIDE
3
During programming, the CS/CTS device will go through a series of
screens telling you the actions it is completing.
The rst screen you’ll see will show Creating les, the second screen
will show Unlocking Module, the third screen Writing les, and
the fourth screen Programming complete. This process can take
several minutes depending on your vehicle year/make/model.
1
4
2
*CAUTION!*
Your Evolution programmer has the ability to remove/adjust your vehicle’s fac-
tory speed limiter. Removal/adjustment of the factory speed limiter is intended
for use at a closed circuit, legally sanctioned racing environment. Even if racing
in a legally sanctioned racing environment, it is your responsibility to ensure
your tires and other vehicle components are rated to travel at increased speeds
with the speed limiter removed/adjusted. If you remove/adjust the speed limiter
during highway driving, it is your responsibility to obey all driving laws, includ-
ing adhering to posted speed limits. Removing/adjusting the speed limiter for
purposes inconsistent with the product’s intended function, as stated herein, is
a violation of the product’s intended use and invalidates the product’s warranty.
Edge Products is not responsible for, or liable for the consequences of improper
product use.
After the CS/CTS device has successfully programmed your vehicle,
the programmed level number will appear on the main screen in the
level indicator box.
To Next Page
Loading...
Need help?
General