Carrying Backpack - The backpack designed to carry
your tub and components when needed.
Hand Net - The net for catching debris on the surface
and within the water in the tub.
Measuring Cup - This is a 30cc measuring cup to use
for sanitizer and oxidizer dosing.
Oxidizer - This Sirona Simply Oxidizer is part of the
water maintenance protocol for the water in the tub.
Refer to the maintenance instructions for proper use.
Sanitizer - The Sirona Simply Sanitizer is part of the
water maintenance protocol for the water in the tub.
Refer to the maintenance instructions for proper use.
Test Strips - The Sirona Simply Test Strips is part of the
water maintenance protocol for the water in the tub.
Refer to the maintenance instructions for proper use.
Tub Patch Kit - The patch for repairing any punctures
causing an air leak in the tub.
Accessories - Included with Edge Tub purchase.
5
Chiller - The main unit which chills/heats,
circulates, and filters the water.
Chiller Drain - The drain with cap at the middle
bottom on the rear of the chiller. This is meant to
be opened to allow the machine to drain water
out when the Chiller is being moved or packaged.
Chiller Fitting Cap - The protective caps that
thread on the Chiller Inlet and Outlet ports.
Hose Connection Fittings - The fittings on the
end of each hose. They connect the Chiller Hoses
to the Chiller Inlet/Outlet and Tub Valve Fittings.
Hose O-Rings: - The o-rings in the hose
connections. These are vital for water-tight and air-
tight connections with the Chiller Hoses and Tub
or Chiller.
Chiller Hoses - The flexible hoses are used to flow
water from the Edge Tub to the Chiller.
Chiller Inlet (Red) - The connection on the chiller,
which incoming water enters through. This is
marked with a red ring.
Chiller Outlet (Green) - The connection on the
chiller, which outgoing water leaves through. This is
marked with a green ring.
Control Panel - The visual readout including Tub
Temperature, Set Point, and the Control Buttons (detailed
in Control Panel References).
Double Action Air Pump - The air pump to inflate and
deflate the Edge Tub.
Inflation Hose - The hose used with the Double Action
Air Pump to inflate and deflate the Edge Tub.