EdgeStar AP14001HS - Attaching Duct Connectors to Hose

7
4. Lower the window to secure the window kit in place. You may need to use duct tape to better
secure the window kit.
Attaching the Duct Connectors to the Exhaust Hose
5. Attach the connectors to the hose:
a. Extend the ends of the exhaust hose.
b. Thread the duct connector onto the exhaust hose by turning it clockwise until it stops.
Caution: Secure your window with window locks. Please contact your EdgeStar retailer to
purchase window locks.