dow Kit an Exhaust
IHs IlstioH IHstru ioHs
Hose
Preparations for
installing the
window kit
You must vent your portable air conditioner when running in it cooling
mode. Your unit includes a window exhaust kit that can be used to
vent the unit out of a window.
Before you begin, make sure you have all the parts necessary for
installation and a location is picked.
Window Kit Parts List:
Exha_ Ho_
Widow E_sust
Remote Con#el Foam :Seal
,_:h BaieHes
Drain _se and
Drain Hose Adap_r
If you have multiple windows, choose one that is near an electrical
outlet that will be able to provide sufficient power to your unit. See the
power requirements listed on the product label printed on the side, or
on the back of your portable air conditioner.
Your window kit can be installed on a horizontal or vertical sliding
window as shown in the following pictures and instructions. Follow the
instructions for which desired window kit installation.
NOTE: You may need to contact your electrician if your room's circuit is not able to power your unit.
To Next Page
Loading...
Need help?
General
