I_sta_atien in a s_iding sash wir_dew (vertical)
Wini _o
'_ Frame
Step 2:
ii _!i,i
Wi
P3:
1
Step 4:
Foam Sea!
Step 1: Cut the foam seal to the proper length and attach
it to the window frame.
Step 2: Attach the window slider kit to the window
frame. Adjust the length of the window slider kit
according to the height of the window. Shorten the
adjustable window kit if the height of the window is less
than 26.5 inches. Open the window sash and place the
window slider kit on the window sill against the frame
securely.
Step 3: Cut the foam seal to the proper length and attach
it on the top of the window slider kit. Close the window
sash securely against the window slider kit.
Step 4: Finally, cut the foam seal to an appropriate
length and seal the open gap between the top window
sash and outer window sash.
To Next Page
Loading...
Need help?
General
