17
Water Heating Error (E34, E35, E36)
Heater not working (E34, E35, E36)
Check wiring connections
Check NTC (Washing Heater)
Check the heater
Check the wires between the PCB and Heater.
Check for open circuit.
Replace the PCBs
Be sure to verify water exists in drum to allow for
heating. If no water, heating will not occur.
NTC sensor thermistor measured values
Temperature Rated
resistance
Maximum
resistance
Minimum
resistance
℃
Ω Ω Ω
25 4815 4960 4670
40 2573 2645 2500
60 1024 1228 1180
80 609.3 626 592.7
The resistance should be in
range from 10 to 16 Ω.
To Next Page
Loading...