EdgeStar CWD1550W - Page 35

34
Service the Door Lock / Water Heater / NTC - Continued
Description
Tools
Needed
Step 5:
Open the Lint /
Coin Trap Door
Access Panel
Remove the 4 screws that secure the access panel to the pump.
Phillips Head
Screwdriver
Step 6:
Remove the
Front panel
Phillips Head
Screwdriver
Step 7:
Check and
replace the
Heater / NTC
From left to right:
 Terminal 1 for heater
 NTC
 Nut securing heater
(Remove the nut to detach the heater)
 Terminal 2 for heater
Wrench
Remove the 4 (four) screws that
secure the front panel at top and
bottom corners. Lift the panel up
to release from the cabinet.