EdgeStar DEP501EW - Dehumidifier Leaking; Power or Circuit Breaker Tripping; Control Panel Light Blink Randomly; Error Code Resolution

Troubleshooting continued...
My dehumidifier is
leaking
My dehumidifier runs
for a little while and
then it trips the power
cord or the circuit
breaker
The control panel lights
blink randomly
Unit has an AS error
Unit has an ESerror
Unit has a EC error
Unit has a P2 error
A drain hose has been
attached and is loose
Cracked water bucket
The dehumidifier may
be plugged into an
outlet that can not
supply the correct
amount of current
Unit may have a faulty
control panel
Humidify sensor error
Temperature sensor
error
Unit malfunction
Bucket is full
Bucket is not correctly
installed
Secure the drain hose.
Route your drain hose
to a drain hole or
condensate pump.
Contact custom.er
service.
Contact an electrician
if the unit works in a
different room or
circuit.
Restart the unit, and if
issue persists, contact
customer service.
Restart the unit, and if
issue persists, contact
customer service.
Restart the unit, and if
issue persists, contact
customer service.
Make sure the ambient
temperature is suitable
for the unit (41°F -
95°F). If not please
operate the unit under
the stated
temperature.
If the ambient
temperature is suitable,
please contact
customer service.
Empty the bucket and
reinstall.
Remove the bucket
and reinstall.
11