Control Panel Overview
Filter
o
Ful
cD
Cont.
c]
Turbo
o
Normal
cY_
On Off Autodeffost
c_ c_ o
Timer
Note: The unit is not a
humidifier; using the increase
humidify button will not add
moisture fo the air.
Button Function
The check filter feature is a reminder fo clean the air filter for a
more efficient operation. The Filter light will illuminate after 250
hours of operation. To reset after cleaning the filter, press the Filter
button and the indicator light will shut off.
(_ ets the unit fo run continuously until the wafer bucket is full. You
will not be able fo use the increase/decrease humidify buttons.
Sets the fan speed from normal fo turbo for your desired level of
moisture removal.
Powers the unit on or off.
(_ Increases the desired relative humidify setting for damper air.
Decreases the desired relative humidify setting for drier air.
Press to initiate the auto start and auto stop feature in conjunction
with the increase and decrease buttons.
Indicator Light Function
Filter Lights up to indicate the filter needs to be cleaned.
The water full light will light up red if the unit has filled
Full
the water bucket.
Cont. Lights up when the unit is set to run continuously until
the water bucket is full.
On/Off Lights up to indicate if the unit is in on or off position.
Turbo Lights up to indicate the fan is on the high setting.
Normal Lights up to indicate the fan is on the low setting.
Auto-Defrost Lights up to indicate the auto defrost operation is on
LCD Display Displays the level of humidity as well as error codes.
EdgeStar Portable Dehumidifier 4
To Next Page
Loading...
