8
Control Panel Functions
1. Power Button: Press to turn the dishwasher ON/OFF.
2. Rinse Aid Warning Light: Indicates when the rinse aid dispenser needs to be refilled.
3. Wash Cycle Complete Light: Indicates when the current wash cycle has ended.
4. Program Selector: Press to select your wash cycle. The wash cycles will display in sequence.
5. Delay Button Increase: Press to increase the time of the delay by one (1) hour increments up
to 24 hours. This establishes how much time will elapse before the selected wash cycle will
begin.
6. Display Screen: Shows the current dishwasher status (running or on delay) as well as the
remaining run or delay time.
7. Delay Button Decrease: Press to decrease the time of the delay by one (1) hour increments
down to 0.
8. Start/Pause Button: Press to start or pause the dishwasher wash cycle.
Wash Cycles
The sequential order of the wash cycles is as follows. Full wash cycle descriptions are provided
on the next page.
P1. Heavy
P2. Normal
P3. Light
P4. Glass
P5. Baby Care and Bottles
P6. Speed
P7. Rinse
To Next Page
Loading...
Need help?
General
