17
Removing the Filter System
In order to remove the filter system for cleaning please follow these steps:
1. Turn the entire filter system counterclockwise and then pull upward.
2. Lift the coarse and fine filters out from the main filter.
3. Gently squeeze the tab on the coarse filter to remove it from the fine filter.
Simply reverse this sequence to reinstall the filter system.
Note:
Never run the dishwasher without the filter system in place.
Improper replacement of the filter system or damaged filters may reduce the performance
level of the dishwasher and/or damage dishes and utensils.
Clean the entire filter system at least once a week when in use.
Inspect the filter after each wash and remove any food remnants and clean under running
water.
To Next Page
Loading...
