9
Smaller ice cube setting:
Pressing the Clean button decreases the size of the ice cubes. The Ice-Full/Red LED will flash as you
decrease the ice size and will finally blink once it has reached the smallest setting.
Larger ice cube setting:
By pressing the Mode button, you can increase the size of the ice cubes. The Ice-Harvest/Yellow LED will
flash as you increase the ice cube size and will finally blink once it has reached the largest setting.
NOTE: During the ice size adjustment, the Ice-Full, Ice-Making and Ice-Harvest LEDS blinking all at once
indicate that the unit is in the regular (middle) setting of the ice cube size. When the machine is in the
cleaning stage or ice full stage, the ice size is not available for adjusting.
To Next Page
Loading...
Need help?
General
