EdgeStar IP220SS - Understanding the Control Panel

5
Using the Control Panel
Power
Use the On/Off button to turn the portable ice maker on and off.
The Power Indicator light will be solid green when the unit is in the
“On” position. If the power light is blinking on and off, the unit is in
standby mode, and indicates the unit is plugged in.
Ice Size Selector
Use the Select button to switch the ice size between small and
large. The S indicator light corresponds to small ice while the L
indicator light corresponds to large ice.
# Button Function
1 POWER Powers the unit on or off.
2 SELECT
Changes the ice size between Small and
Large. The indicator light will turn on
next to the size you set.
# Indicator Function
3 ADD WATER
The add water light will turn on if the unit
does not have water in the reservoir.
4 ICE FULL
The ice full light will turn on if the ice
basket is full.
5 POWER
The power light will be solid green when
the unit is powered on.
6 S
The S indicates the unit will produce
small ice.
7 M
The M indicates the unit will produce
medium ice.
8 L
The L indicates the unit will produce
large ice.
3
4
IMPORTANT: Do not power on
the unit without any water.
1
2
6
7
8
5