30
3.8.2 AP Advanced
Parameter Description
Beacon Interval Beacon Interval that specifies the duration between beacon
packets (milliseconds). The range for the beacon period is
between 20-1000 milliseconds with a typical value of 100.
DTIM Period Determines the interval the Access Point will send its broadcast
traffic. Default value is 3 beacons.
Preamble The preamble defines the length of the CRC block for
communication among the wireless stations. There are two mode
including Long and Short. High network traffic areas should use
the shorter preamble type.
Set Defaults
Set the setting values return to defaults.
Apply
Confirm the settings in the “Advanced“.
To Next Page
Loading...
