52
IV-4-3. SD Card Settings
Unmount your MicroSD card using the “Unmount” button before
removing the card from your network camera.
Displays the MicroSD card status of your
network camera: available or unavailable.
Displays the available space on the MicroSD
card in your network camera.
Notify when space is
not enough
Enable or disable email notifications when
your storage space is full.
Enable or disable cycle recording. When
enabled, cycle recording will overwrite the
earliest recordings when the storage space
becomes full. When disabled, recording will
stop when storage is full.
Click to format your MicroSD card. This will
erase all data on your MicroSD card.
Click to unmount your MicroSD card from the
network camera. This is recommended before
removing the MicroSD card from the camera.
To Next Page
Loading...