How to fix fuzzy image on Edimax IC-7000PTn IP Camera?
If your Edimax IP Camera image appears fuzzy, try these solutions: 1. Adjust the focus ring on the camera until the image becomes clearer. 2. Clean the lens with a soft cloth; you can use water, but avoid alcohol or chemical solutions. 3. Adjust the brightness setting. 4. If possible, turn on the lights in the camera's location to see if the image improves.
What to do if Edimax IP Camera is not responding?
If your Edimax IP Camera is not responding, check the following: * Ensure that the network cable is connected or the wireless connection is active. * Try unplugging the power adapter from the wall socket, wait 10 seconds, and then plug it back in before attempting to reconnect to the IP camera. * If the camera is powered on (the 'Power' LED is lit) and you're certain the IP address is correct, but you still cannot connect, contact the dealer from whom you purchased the camera.
To Next Page
General
