Network Camera User’s Manual
8/59
Connect to the Network Camera
Locate the IP address of Network IP Camera
You can use your new Network IP Camera by its web user interface via web browser.
Currently the viewing system requirement for Network IP camera is:
■ OS: Microsoft Windows XP/Vista/7
■ Browser: IE7, 8, 9 (32Bit)
■ Cell phone: 3GPP player
By default, the network camera automatically obtains an IP address from the DHCP
server on your local network. Check your DHCP server‘s IP address lease table to find
the network camera‘s IP address, or use the EdiView Finder utility included in the CD.
1. Insert the CD into your CD-ROM drive. When the wizard appears, click ―Setup Utility‖
to install the ―EdiView Finder‖ software.
Note: We recommend that you use Microsoft Windows to install your network
camera - Mac is not supported.
Note: For best viewing experience we recommend that you use Microsoft
Windows Internet Explorer 7, 8, or 9.
To Next Page
Loading...
