Need help?Do you have a question about the Edimax IC-3140W and is the answer not in the manual?
General| Type | IP security camera |
|---|---|
| PTZ control | - |
| Certification | FCC, CE |
| Placement supported | Indoor |
| Connectivity technology | Wired & Wireless |
| Form factor | Cube |
| Mounting type | Desk |
| Product color | White |
| LED indicators | Yes |
| Maximum resolution | 1280 x 720 pixels |
| Supported video modes | 720p |
| Video formats supported | H.264, M-JPEG |
| Supported graphics resolutions | 320 x 240, 1280 x 720 (HD 720), 640 x 480 (VGA) |
| Minimum illumination | - lx |
| Field of view (FOV) angle | 78 ° |
| Optical zoom | - x |
| Built-in HDD | No |
| Flash memory | 8 MB |
| Internal memory | 64 MB |
| Compatible memory cards | MicroSD (TransFlash), SD, SDHC |
| LED type | IR |
| Night vision distance | 4.5 m |
| Number of illumination LEDs | 4 |
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Cabling technology | 10/100Base-T(X) |
| Wi-Fi data rate (max) | 300 Mbit/s |
| Supported network protocols | IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, RTCP, SMTP, SNTP, FTP, DHCP, ARP, DNS, PPPoE |
| Compliance industry standards | IEEE802.3, IEEE802.3u, IEEE 802.11b/g/n |
| Ethernet LAN (RJ-45) ports | 1 |
| AC input voltage | 12 V |
| DC output current | 1 A |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
Weight and Dimensions| Depth | 27.2 mm |
|---|---|
| Width | 65 mm |
| Height | 110 mm |
| Weight | 100 g |
Lists all items included in the product package.
Specifies the necessary hardware and software for operation.
Identifies front/back panel components & LED status.
Details product label info and how to reset the device.
Instructions for assembling and using the camera mounting kit.
Guides on connecting the camera for setup and initial power-up.
Steps for setting up the camera using the EdiView II mobile app.
Instructions for setting up the camera using EdiView Finder software on PC.
Guide for connecting the camera wirelessly using the WPS method.
Configuring basic settings, network type, and IP address.
Steps to connect the camera wirelessly via smartphone or computer.
Settings for Dynamic DNS, RTSP, UPnP, and Bonjour.
Adjusting video quality, resolution, and image parameters.
Configuring motion/sound detection, scheduling, and alerts.
Managing recording storage, system settings, and firmware.
Viewing camera status, system information, and logs.
Guide to accessing the camera remotely via the cloud service.
Installing the viewer software and understanding its main interface.
Adding, configuring, and managing cameras in the viewer.
Setting schedules, changing layouts, and using PTZ/zoom controls.
Regulatory information regarding FCC and EU directives.
Legal terms for the free software included with the device.
To Next Page
