9
I-6. Product Label
The product label located on the back of the camera displays the MAC address,
cloud ID and setup SSID of your network camera.
The MAC address and cloud ID are the same for easy reference.
The cloud ID allows you to view a live stream from your network camera
remotely (from any Internet connection) as described later in V
Myedimax.com.
I-7. Reset
If you experience problems with your network camera, you can reset the
camera back to its factory default settings. This resets all settings back to
default.
1. Press and hold the WPS/Reset button found
on the back panel for at least 10 seconds
2. Release the button when the green power
LED is flashing quickly.
3. Wait for the network camera to restart. The
camera is ready when the green power LED
is flashing slowly.
After setup, the green power LED will
display on to indicate a successful
connection to the cloud server.
To Next Page
Loading...
