67
IV-3-1-3. Schedule Settings
The network camera’s motion detection function can be scheduled to be
active on/at specified times and days. Select “Enable” to enable this feature
and then define which times the network camera’s motion detection will be
active using the table below.
For each day, click and drag across the timeline on the times which you want
motion detection to be active. A blue box indicates a scheduled recording. In
the example below, motion detection is scheduled for 8am – 6pm Monday to
Saturday.
By default, the schedule may be full. Delete existing entries if
necessary. For scheduled recording, see Storage Settings
Schedule Settings.
To Next Page
Loading...
