Do you have a question about the Edimax IC-9110W and is the answer not in the manual?
Type | IP security camera |
---|---|
PTZ control | - |
Certification | FCC, CE |
Placement supported | Outdoor |
Connectivity technology | Wired & Wireless |
Wide Dynamic Range (WDR) | Yes |
Form factor | Bullet |
Mounting type | Ceiling/wall |
Product color | Silver |
Housing material | Metal |
Protection features | Water resistant |
International Protection (IP) code | IP66 |
Full HD | No |
Maximum resolution | 1280 x 720 pixels |
Video formats supported | H.264, M-JPEG |
Supported graphics resolutions | 640 x 360, 1280 x 720 (HD 720) |
Minimum illumination | - lx |
Optical zoom | - x |
Security algorithms | WPS |
Flash memory | 8 MB |
Internal memory | 128 MB |
Compatible memory cards | MicroSD (TransFlash), MicroSDHC |
Maximum memory card size | 32 GB |
LED type | IR |
Night vision distance | 15 m |
Number of illumination LEDs | 20 |
Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Cabling technology | 10/100Base-T(X) |
Supported network protocols | IPv4, HTTP, TCP, ICMP, RTSP, RTP, UDP, RTCP, SMTP, SNTP, FTP, DHCP, ARP, DNS, PPPoE |
Ethernet LAN (RJ-45) ports | 1 |
DC output current | 1 A |
DC output voltage | +12V |
Power source type | PoE |
Sustainability certificates | RoHS |
Operating temperature (T-T) | -20 - 50 °C |
Depth | 147.8 mm |
---|---|
Width | 63.5 mm |
Weight | 330 g |
Instructions on how to restore the device to factory default settings.
Guide to setting up the camera using the EdiView II smartphone app.
Instructions for setting up the camera using the EdiView Finder software.
How to connect the camera to a wireless network using WPS.
Setup for motion detection, sound detection, and notifications.
How to add and configure cameras within the 16 Channel Viewer.