Edirol FA-66 - Digital Performer

43
Software settings
In this example we are using Digital Performer 4.5.
fig.digiperf.eps
1.
Power up the FA-66, and then start up
Digital Performer.
2.
From Digital Performer’s Setup menu,
choose Audio System , and verify that
MOTU Audio System is checked.
3.
From the Setup menu, choose Configure
Audio System - Configure Hardware
Driver .
The Configure Hardware Driver dialog
box will appear.
4.
In the list, click EDIROL FA-66 to select
it, and then click [OK] .
Digital Performer
FA-66_e.book 43 ページ ２００６年１月１２日 木曜日 午前１１時３２分